emco - english > emcoklima > emcotherm convectors > Standing convectors > Model EKO

Model EKO

emcotherm model EKO

Standing convector emcotherm EKO
Free-standing convector; forced convection for cooling (PKW) in re-circulation mode

Description:
Convector element: Rigid aluminium lamellae on copper piping with connections (1/2”) on one side, and ventilation device (2-pipe system), operated with actuator, operating voltage 24 V, normally closed Available as an option: Parker quick-release couplings (subject to additional charge)
Housing: Galvanised sheet steel, rolling; water connection openings at front side; integrated condensate trough with drainage connection and retractable filter element (class G2, regenerative)
Fan: Galvanised sheet steel radial fan (230 V, 50 Hz) that draws in air at both sides, thermal protection switch, IP44 degree of protection; infinitely adjustable
Control: Integrated setting and control equipment for manual and automatic operation, with selectable set temperature and audible error signal (can be disabled).

Areas of application
Cooling convectors require a cold water and electrical connection, whereby integrated control devices allow continual adjustment of the circulating air flow to the actual requirement. The re-circulation cooling convector EKO is designed mainly for use in closed rooms or cabinet units in which high cooling loads must be
reduced in order to not exceed the maximum temperature tolerable for persons and technical devices. It is generally possible to equip the EKO units on site with a suitable casing so that it integrates well into the room architecture.

Product advantages